In addition, this is applicable for certain things like wooden based picture frames. Not to mention, sufficient clearance is offered for a nail gun with a view to tacking the pieces together. Unlike other available spring woodworking bench clamps clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pierce the wood so that there is minimal visible evidence of the clamps being used after you remove them.

corner clamps for woodworking

The reference price can give you an indication of the value of the product butsome stores may sell the item for less than the reference price. If you feel a reference price is inaccurate or misleading please report it with the URL for the listing to report- Effortlessly fix, align & hold your workpieces together with precision and perfect alignment. The Square 90 is available in 4″ or 6″ size and can be clamped on the inside or outside corner of your work piece making this a very versatile Clamping Square for any project. Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2″ plywood to thick 2×4 boards.

Right Angle Clamp

Whether you are a DIY woodworker or a professional carpenter, this is a easy-to-use and perfect tool to own. Wood, steel and glass can be connected through it, you can use your imagination to make photo frames, tables, chairs, cabinets and even fish tanks. Even commercially offered clamping jigs are of this general design. The angles are/provide the ‘inward’ pressure to the mitered faces and the smaller triangular piece merely provides a surface for the actual clamp. There ‘outward’ pressure exhibited is negated by the outside pieces, due in part to the ‘relief’ hole.

corner clamps for woodworking

It could also be attached to a drill press bed for clamping objects when drilling holes. Keep reading below to learn more about corner clamps and what they can be used for. Corner clamps are devices that help secure corners of your project while gluing or securing them together.

Make Joining Wood At Right Angles Easier With These Top Angle Clamps

Making your own is an economical solution that is also relatively simple, especially if you have one or more corner clamps. These handy little devices hold two pieces of material together and center them at a right angle so you can nail or glue the parts in place. They ensure precision, reduce gaps in joints, and speed up the whole process.

  • To avoid glue squeeze out on your work pieces apply painter’s tape to each extending edge of your miter cut to prevent glue from sticking to the wood.
  • Before investing your hard-earned money on, there are a few tips you may want to look at.
  • But that does not mean you cannot be smart about your investment.
  • Single-handle clamps also offer a high degree of accuracy, as they enable you to clamp both pieces simultaneously via a single handle once aligned.
  • It can work well with 90-degree corners and T joints while you work on them.

Bessey’s clamp excels due to the unmatched quality of its construction, smart design, and precision. Its die-cast body is coated with a slick plastic so pieces to be clamped can glide along the jaws and remain protected from damage. This construction enables you to align tall pieces and even pieces of different lengths and thicknesses. While cheaper or lower-quality clamps might bend or warp over time, this one will retain its strength and precision, making it a great option for high-volume frame making. If you make a lot of cabinets, cases, frames and boxes then investing in quality corner clamps will increase the quality of your project. I prefer the Kreg 90° corner clamp for the quickest and easiest option.

How We Sell Great Tools At The Lowest Prices

Remember, it is a versatile tool and will offer you a lot of utility as long as you have a clear idea of how it works. The clamping screw also pivots to allow for joining materials of different thicknesses. Holes on the clamp base allow for mounting the clamp to a workbench. This is a great crafting option that even includes a kid-proof handle to prevent little fingers from being clamped. A right angle clamp will make an excellent addition to a workshop. They are built with durable materials and innovative designs that simplify the process of joining wood and other materials at right angles.

The clamps are large enough to provide strong pressure and will prevent marking. Another critical aspect of the corner clamp is to check its jaw capacity. The capacity essentially dictates how big of a material you can use with the unit. In simpler terms, the distance between the clamping block and the outer wall is known as its jaw capacity. The unit comes with some excellent features that even a beginner can use it smoothly for the beginner’s woodworking projects. For instance, the swing jaw design in the machine allows you to clamp it quickly while the spindle screws are also smooth.